US Water Systems Disruptor Electro-Adhesion 4-Stage Filter System
Simply The Ultimate In Filtration…
- No Electricity
- No Wasted Water
- No Chemicals
- Nothing Added to the Water
From particles as big as the naked eye can see to submicron and colloidal particles, the US Water Systems Disrupter Filtration system rapidly absorbs particles of all sizes down to below 0.2 microns through “Step-Down” Filtration and “Electro-Adhesion.”
Cutting-Edge Technology For Severe Water Problems
- Stage 1: 5 Micron Magna filter
- Stage 2: 1 Micron Magna filter
- Stage 3: 0.5 Micron Magna filter
- Stage 4: Disrupter Nanofiber Zeta-Charged Electro-Adhesion filter
The US Water Disruptor Filter is manufactured with micro-fibers that have a Zeta potential of 51 millivolts. Many contaminants are actually "magnetically" removed from the water supply and "secured" in the Charged Filter. This is truly "disruptive technology." However, the key to the Disrupter working efficiently is the Step-Down Pre-Filtration. Each “Magna” Filter (Magna means “great” in Greek) has 36 sq/ft of pleated polyester (not paper) filter media inside. That is at least 10 sq/ft more than our closest competitors. That means the filters actually filter better and lasts longer. It is imperative that the Disrupter Filter be protected by removing as many contaminants as possible in Stages 1,2 and 3.
What Is "Disruptive Technology"?
A disruptive technology is one that displaces an established technology and shakes up the industry or a ground-breaking product that creates a completely new industry.
When the PC replaced the typewriter, it forever changed the way we work and communicate. Cell phones were "disruptive technology" because it allowed us to communicate from almost anywhere and the US Water Disruptor Filter System is "disruptive technology" in that a filter system can now remove/reduce the following contaminants:
- Arsenic III
- Chromium 6
- Fulvic Acid
- Humic Acid
- Ferrous Iron
The US Water Disruptor media has no known Health Side Effects and has passed testing for NSF/ANSI Standard 42 and 61 for potable water and USP Class VI testing and endotoxin testing.
- Peak Flow: 25 GPM
- Pipe Size: 1" MNPT
- Cartridges have a double o-ring seal for a positive barrier
- System conforms to NSF/ANSI 61 Certified by WQA
- Rated at 90 psi
- Low pressure drop - typically < 3 PSID (clean)
- Includes filters, mounting bracket, screws, and housing wrench
- Turbidity < 1 NTU
- TOC < 50 mg/l
- pH 5-9.5
- Iron < .3 ppm
- Manganese < .05 ppm
Read This Before You Buy This Product
This systems performance is dependent upon incoming water quality and factors such as iron, sulfur, manganese, sediment and other particulates need to be addressed ahead of the US Water Disruptor Filter. Life expectancy of the filter varies with the water supply, but many users experience filter change intervals in excess of a year when coupled with proper pre-treatment.
In a sense, it is like ultraviolet or UV disinfection in that the water needs to be free of sediment, silt, algae, sand, iron, sulfur and manganese. There are hundreds of organics in a water supply that can impact its performance, so there are no guarantees on life expectancy, although in most cases, they do last 6 months to a year.
If you are unsure how to apply the Disruptor, please contact one of our Certified Water Specialists at 800-608-8792 before purchasing it.