US Water Electro-Absorptive Nanofiber Filter Uses Mechanical Filtration And Electro-Adhesion Utilizing Cutting-Edge Technology
The US Water Interceptor Pre-Filter has a 5 micron outer filter layer (which can be washed off if sediment accumulated). Inside the filter is another layer of pleated material manufactured of Nano Alumina Fibers that have a Zeta potential of 51 millivolts. Many contaminants are actually "magnetically" removed from the water supply and "secured" in the Charged Filter.
Much More Than A Pre-Filter - It's A Sub-Micron Filter
Reduces Chromium 6
Removes 99.9% Bacteria
Removes 99% Cysts
The US Water Disruptor media is manufactured from a naturally occurring element called boehmite, which has no known Health Side Effects. In fact, boehmite has long been used as an additive to food products and digestive analgesics. Additionally, it has passed testing for NSF/ANSI Standard 42 and 61 for potable water and USP Class VI testing and endotoxin testing.
Peak Flow: 12 GPM
Pipe Size: 3/4" MNPT
Cartridge has double o-ring seal for a positive barrier
System conforms to NSF/ANSI 61 Certified by WQA
Rated up to 90 psi
Low pressure drop - typically < 3 PSID (clean)
Includes mounting bracket, screws, and housing wrench
Turbidity < 3 NTU
Iron < .3 ppm
Manganese < .05 ppm
This systems performance is dependent upon incoming water quality and factors such as iron, sulfur, manganese, sediment and other particulates need to be addressed ahead of the Pulsar Interceptor Pre-Filter. Life expectancy of the filter varies with the water supply, but many users experience filter change intervals in excess of a year when coupled with proper pre-treatment
Read This Before You Buy This Product:
The Interceptor electro-adsorptive filter media takes out a very wide spectrum of contaminants, including bacteria, virus, cysts and Chromium 6. However, iron, sulfur and manganese must be removed ahead of it.
This system’s performance is dependent upon incoming water quality and factors such as iron, sulfur, manganese, sediment and other particulates need to be addressed ahead of the US Water Interceptor Filter.
Life expectancy of the filter varies with the water supply, but many users experience filter change intervals of between six months to one-year when coupled with proper pre-treatment. It is an excellent idea to have a 1 Micron Filter ahead of the US Water Interceptor filter.
In a sense, it is like ultraviolet or UV disinfection in that the water needs to be free of sediment, silt, algae, sand, iron, sulfur and manganese. There are hundreds of organics in a water supply that can impact its performance, so there are no guarantees on life expectancy, although in most cases, they do last 6 months to a year.
Tannins are somewhat problematic. They are removed in over 75% of the cases, but occasionally, they are impossible to remove, due to the nature of the tannin itself or due to other competing contaminants. If the tannin is not removed by the Disrupter, then the only choice is a Matrixx Tannin Water Filter that uses sodium chloride as a regenerant. The filter has a one-year warranty for structural integrity and manufacturing defects, but is not warranted against plugging and/or failing to remove tannin. You will still use the housing as a pre-filter if you do not use the Disrupter.
Many times, Doctors prescribe medication that works for most people, but not everyone. When he changes the prescription and prescribes another, he doesn’t refund the cost of your former prescription. The Interceptor is an amazing, disruptive technology that removes more contaminants than any other filter. In some cases, we replace the Interceptor cartridge with the Magna Cartridge if the Interceptor plugs too quickly. The Magna Cartridge is available in 20, 5, 1 and .5 micron sizes. If you are unsure how to apply the Interceptor, please contact one of our Certified Water Specialists at 800-608-8792 before purchasing it.