view less−Product Description
Cutting-Edge Technology Up To 80 GPM For Severe Water Problems
The new US Water electro-absorptive nanofiber filter uses mechanical filtration and zeta charged electro-adhesion
The US Water Disruptor Filter is a Nano Alumina Fiber that has a Zeta potential of 51 millivolts. Contaminants are actually "magnetically" removed from the water supply and "secured" in the Charged Filter. This is most certainly "disruptive technology."
What is "disruptive technology"?
A disruptive technology is one that displaces an established technology and shakes up the industry or a ground-breaking product that creates a completely new industry.
Removes Or Reduces The Following Contaminants:
- Arsenic III
- Bacteria (99.999%)
- Chromium 6
- Cysts (99.9%)
- Fulvic Acid
- Humic Acid
- Legeonella (99.99%)
- Tannic Acid
The US Water Disruptor media is manufactured from a naturally occurring element called boehmite, which has no known Health Side Effects. In fact, boehmite has long been used as an additive to food products and digestive analgesics. Additionally, it has passed testing for NSF/ANSI Standard 42 and 61 for potable water, USP Class VI testing, and endotoxin testing. US Water Disruptor Filtration is the final barrier against the problem contaminants such as fine colloids, silica, tannin, bacteria, and other organics.
This system is set up as an 80 GPM Parallel System. This is ideal for any application where high flow rates are needed, such as manufacturing processes, craft beer brewing, hydroponics, and even custom or estate-style homes.
- 100% Made In America
- Lifetime warranty on system
- Fully assembled and ready to install
- Fully modular so it can be easily expanded
- Great for removing Chromium 6 and lead
- Up to 99999% effective against bacteria, cysts, and virus
- Excellent at removing tannin (see before and after pictures below)
- 1" Inlet handles up to 80 GPM (parallel system)
- Cartridge has double o-ring seal for a positive barrier
- System conforms to NSF/ANSI 61 Certified by WQA
- Rated at 100 psi
- Low pressure drop - typically < 3 PSID (clean)
- Turbidity < 1 NTU
- TOC < 50 mg/l
- pH 5-9.5
- Iron < .3 ppm
- Manganese < .05 ppm
This systems performance is dependent upon incoming water quality and factors such as iron, sulfur, manganese, sediment, and other particulates need to be addressed ahead of the US Water Disruptor Filter. Life expectancy of the filter varies with the water supply, but many users experience filter change intervals in excess of a year when coupled with proper pre-treatment. It is an excellent idea to have a 1 Micron Filter ahead of the US Water Disruptor filter.
The Disrupter electro-adsorptive filter media takes out a very wide spectrum of contaminants, including bacteria, virus, cysts and Chromium 6. However, iron, sulfur and manganese must be removed ahead of it. In a sense, it is like ultraviolet or UV disinfection in that the water needs to be free of sediment, silt, algae, sand, iron, sulfur and manganese. There are hundreds of organics in a water supply that can impact it’s performance, so there are no guarantees on it’s life expectancy, although in most cases, they last 6 months to a year. Tannins are somewhat problematic. They are easily removed in over 90% of the cases, but occasionally, they are impossible to remove, due to the nature of the tannin itself or due to competing contaminants. The filter has a one year warranty for structural integrity and manufacturing defects, but is not warranted against plugging and/or failing to remove tannin. It’s like a doctor prescribing a medication that does not work for you, but works for most people. When he changes the prescription and prescribes another, he doesn’t refund your former prescription. The Disrupter is amazing, disruptive technology that removes more contaminants than any other filter.
view less-Additional Information
|Availability||Custom Built To Order|
|Color||Black Cap | Gray Sump|
|Manufacturer||US Water Systems|