US Water 2.5 x 10 Carbon Block Filter | USWCB-2510-10

US Water Carbon Block Filter 2.5 inch x 10 inch - 10 Micron Filter

• Filter elements are designed to fit most standard 10” filter housings.
• This high quality carbon block media is manufactured from raw materials to precise specifications entirely in a US manufacturing facility.
• This filter element is rated at 10 microns.
• Elements are finished with a single layer of spun-bonded polypropylene netting.
• Polypropylene end caps with compression gaskets are standard.

Specifications

• 

  Micron Rating: 10 Micron
• Dimensions: 2.5 O.D. x 1.25 I.D. x 10" L
• Chlorine Reduction (greater than 95%): 8,000 Gallons @ 1 GPM
• Carbon Type: Coconut Shell Carbon
• Operating Temperature: 40 to 125 Degrees F
• Operating Pressure: 250 psi
• Case Quantity: 20

Replaces The Following

• American Plumber 155634-51, 555531-43
• Aqua-Pure AP117
• Aries CB-10-6310-TO
• CA Ware CBC-10
• Everpure EV910916
• Fibredyne CFB-10, 255671-43
• Hydronix CB-25-1010
• Hydro Guard HDG-P117
• KX Industries 32-250-125-975
• Neo-Pure CT01-2510
• Omnipure OMB-934-5M
• Pentek EPM-10, EP-10, 155634, 155634-43
• EP10-10WF

 

NOTE: Some of the above filters use Granular Activated Carbon (GAC) while ours use GAC Carbon Block Technology.  We believe that it is a superior technology over GAC and has vastly superior chemical removal capacities.  Also, there are made in the USA, unlike many of the above filters.