US Water 10 Inch Inline Carbon Filter | INLRO-14
US Water 10 Inch In-line Granular Activated Carbon Filter
Customers can rely upon this simple but dependable inline carbon filter for a variety of used including ice machines, water coolers, drinking fountains, as was as under-the-sink applications and as components in reverse osmosis systems. You will find a use for this filter in virtually any situation where better tasting water is important.
Our filters have superior engineering and production techniques. Each filter utilizes a unique spring disc that keeps media under ideal pressure, eliminating channeling and ensuring an equal distance linear path. Furthermore, no glues or binders that may cause contamination are used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, no-leak seal. Additionally, all threaded connections are precision cut by machine which results in the most accurate and repeatable thread possible.
- 1/4" FPT on each end
- Flow Rate: .5 GPM
- Coconut Shell Granular Activated Carbon (GAC)
- Class 1 Filtration
- Maximum Temperature - 100 Degrees F
- NSF Standard 42 Certified
Replaces the Following Filters
- Everpure IN-10 CS
- Everpure EV9100-69
- Everpure EV910069
- Hydronix ICF-10
- Omnipure CL10RO40-B
Test Information: The US Water filter housing and fittings have been tested for performance under NSF Standard 42. Tests included Hydro Static Testing at 300 psig and Cycle Testing of 100,000 repetitions from 0 to 150 psig. US Water products have been tested and listed under Standard 42 for taste, odor and chlorine reduction; or particulate reduction; or have been materials certified. All filters should be installed on cold water lines only. NOTE: Activated carbon filters are not intended to be used where the water is micro-biologically unsafe or with water of unknown quality without adequate disinfection before or after the unit
Warranty Information: US Water Systems warrants that the products delivered will be free from any defects in workmanship or materials. Further, the warranty provided herein applies, only when used within the products specifications and service life, from the date of installation or 5 years from the date of manufacture whichever occurs first, beyond which time or use Omnipure is absolved of any and all liability for any use of the product. In the event of defect or non-conformity, buyer shall promptly notify Omnipure in writing, supplying proof of purchase dates, installation dates, and will protect and retain the products for investigation, or Omnipure is absolved of any and all liability for any use of the product. There are no other warranties, either merchantability or fitness, either expressed or implied.
|Filter Type||Carbon Filters|
|Micron Rating||5 Micron|
|Manufacturer||US Water Systems|