view less−Product Description
Cutting-Edge Technology for Severe Water Problems
US Water ELECTRO-ABSORPTIVE NANOFIBER FILTER USES MECHANICAL FILTRATION AND ZETA CHARGED ELECTRO-ADHESION
The US Water Disruptor Filter is manufactured with Nano Alumina Fibers that have a Zeta potential of 51 millivolts. Many contaminants are actually "magnetically" removed from the water supply and "secured" in the Charged Filter. This is truly "disruptive technology."
What is "disruptive technology"?
A disruptive technology is one that displaces an established technology and shakes up the industry or a ground-breaking product that creates a completely new industry.
US Water Disruptor Sub-Micron Filter System is "disruptive technology" in that a filter system can now remove the following contaminants:
- Arsenic III
- Bacteria (99.99%)
- Chromium 6 (>85%)
- Cysts (99.99%)
- Fulvic Acid
- Humic Acid
- Ferrous Iron (>80%)
- Mercury (>60%)
- Selenium (>75%)
- Tannic Acid
The US Water Disruptor media is manufactured from a naturally occurring element called boehmite, which has no known Health Side Effects. In fact, boehmite has long been used as an additive to food products and digestive analgesics. Additionally, it has passed testing for NSF/ANSI Standard 42 and 61 for potable water and USP Class VI testing and endotoxin testing. US Water Disruptor Filtration is the final barrier against the problem contaminants such as fine colloids, silica, tannin, and other organics.
- Peak Flow:
- 4.5” x 10” - 12 GPM
- 4.5” x 20” - 25 GPM
- Pipe Size:
- 12 GPM - 3/4" MNPT
- 25 GPM - 1” MNPT
- Cartridge has double o-ring seal for a positive barrier
- System conforms to NSF/ANSI 61 Certified by WQA
- Rated at 90 psi
- Low pressure drop - typically < 3 PSID (clean)
- Includes mounting bracket, screws, and housing wrench
- Turbidity < 1 NTU
- TOC < 50 mg/l
- pH 5-9.5
- Iron < .3 ppm
- Manganese < .05 ppm
This systems performance is dependent upon incoming water quality and factors such as iron, sulfur, manganese, sediment and other particulates need to be addressed ahead of the US Water Disruptor Filter. Life expectancy of the filter varies with the water supply, but many users experience filter change intervals in excess of a year when coupled with proper pre-treatment. It is an excellent idea to have a 1 Micron Filter ahead of the US Water Disruptor filter.
The Disrupter electro-adsorptive filter media takes out a very wide spectrum of contaminants, including bacteria, virus, cysts and Chromium 6. However, iron, sulfur and manganese must be removed ahead of it. In a sense, it is like ultraviolet or UV disinfection in that the water needs to be free of sediment, silt, algae, sand, iron, sulfur and manganese. There are hundreds of organics in a water supply that can impact it’s performance, so there are no guarantees on it’s life expectancy, although in most cases, they last 6 months to a year. Tannins are somewhat problematic. They are easily removed in over 90% of the cases, but occasionally, they are impossible to remove, due to the nature of the tannin itself or due to competing contaminants. The filter has a one year warranty for structural integrity and manufacturing defects, but is not warranted against plugging and/or failing to remove tannin. It’s like a doctor prescribing a medication that does not work for you, but works for most people. When he changes the prescription and prescribes another, he doesn’t refund your former prescription. The Disrupter is amazing, disruptive technology that removes more contaminants than any other filter.
view less-Additional Information
|Color||Black Cap | Gray Sump|
|Manufacturer||US Water Systems|
VideosSorry No Videos Available
view less-Ratings & Reviews
view less-Product FAQs
No Faqs Found !