Matrixx Nitrate Water System With Smartphone Programming
US Water Matrixx Nitrate Water Softener With Smartphone Programming
Advanced Nitrate Removal System Using Nitrate Resin
This is system that utilizes heavy-duty commercial parts and the highest efficiency nitrate resin. It looks like a water softener but it does not soften the water. It does use salt to regenerate the tannin resin and is the technology of choice for difficult to remove nitrate problems.
It is built for the 21st Century Homeowner in mind, because it eliminates those primitive dinosaur programming buttons. Instead, it is programmed with the Waterlogix App available for FREE on your Apple or Android smartphone.
It is important that the feed water for the Nitrate water system is soft. If there is any hardness in the feed water a US Water Systems water softener should be in installed prior to the Nitrate water system. Hardness in the feed water will inhibit the performance of the Nitrate Water System.
- Communicates with your Smartphone via Bluetooth
- Simply set the hardness, time of regeneration, and then set the actual time of your Smartphone it sets itself automatically
- Reads current flow rate and peak flow rate
- Monitors todays water usage, monthly water usage and remaining battery life
- Uses 9 Volt battery, so that if power goes out during regeneration, it automatically returns to service so as not to continually waste water to the drain
- Fully programmable cycles and salt usage
- Can be precision tuned to use as little salt as desired
- Precise Electronic Metering assures that you will have the nitrates removed even under high flow days
- Provides the data necessary for the most efficient systems optimization and efficiency.
- Gives solid data as to how much water is actually used in the household as well as flow rates and other intelligence.
- Allows full programmability for your water type.
- Easy programming and no confusing codes.
- Fills Brine Tank with Nitrate Free Water Keeps controls in tip-top operating condition
- 12 Volt Electrical System - Uses less than $2.00 a year of electricity, with no danger of electrical shock.
- Utilizes all NSF and/or WQA Certified Components When only the best will do.
- Chrome tank protector - Always looks like new and wipes clean easily. Looks just as good in 20 years!
- Available in 7 GPM and 15 GPM Sizes
- Vortech Resin Tank for optimal flow
- 1" Stainless Steel Bypass
- Made in USA
- The Best Warranty in the Business:
- Lifetime on Tanks
- 10-Years on the Valve and Electronics (Includes Internal Parts)
NOTE: If your water supply exceeds 5 gpg of hardness, it is recommended that a water softener be installed ahead of this system.
|Model||Cu/Ft Resin||Max Flow||Resin Tank||Brine Tank||Weight (lbs)|
|080-MXX-NT-100||1.00||7 GPM||9 x 48||15 x 35||100|
|080-MXX-NT-200||2.00||15 GPM||12 x 52||15 x 35||160|
|Resin Type||Nitrate Resin|
|Manufacturer||US Water Systems|