Product Description
Product Description
Harmsco HIF-7-WW The Only Cartridge Filter With A Built-In Heat Exchanger
Improve your machining quality! Heat or cool as you filter. No need for separate heat exchanger. Compact design and dual-purpose. features save space, piping and installation time. Improves lubrication and cutting performance.
Applications
- Viscous fluid filtration
- Chilling coolants for sawing/machining
- Chilled Water Recirculation/Loops
- Parts washers
- Plating industry
- Ultrasonic cleaning
Why Is Up-Flow Such A Big Deal?
Why Is Up-Flow Such A Big Deal?This product is designed with a patented Up-Flow Technology which prevents the accumulation of air inside the filter housing, keeping the filter operating at 100% efficiency. In a typical competitive multi-cartridge filter, there is a potential for air entrapment. With outlets located below inlets, air travels upward so vents are needed to expel air that can accumulate within the filter vessel during operation. There is also a potential for by-pass. With outlets located below inlets, by-pass can occur as unfiltered liquid drains downward to the sump while the cartridges are removed. This may result in by-pass when the filter is put back into service.
So What Makes The Harmsco HIF Up-Flow Filter Different?
Features
- Patented Up-flow design
- Electropolished 304 stainless steel housing
- Cartridge cluster is easily removed for cleaning/replacement
- Three sizes for greater media surface area and thermal output transmittance
- Equipped with Harmsco® Premium 801-20-HT Polyester-Plus™ filter cartridges
- Fail Safe lid closure, rated for 150 psi
Specifications
- Electropolished 304 stainless steel
- Standpipe - 304 stainless steel
- Temperature - Up to 200˚F (93˚C)
- Pressure - 150 PSI (10 bar) max
- Lid Closure - Wing nuts, brass
- Rim Gasket - EPDM (Buna-N, Viton avail.)
- Inlet/Outlet Connections - standard (1-1/2” NPT plumbing; 1/2” NPT heating/cooling loop)
Equipped with Harmsco® Premium 801-20-HT Polyester-Plus™ filter cartridges
Options
- Stainless Steel Internals
Dimensions
- A - Filter Height: 19-1/4"
- B - Drain: 4-1/4"
- C - Diameter: 13"
- D - Outlet: 4-1/8"
- E - Inlet: 3-7/8"
- F - Heat/Cool Inlet: 8-1/8"
- G - Heat/Cool Outlet: 15-1/8"
- Service Height: 31"
- Floor Space: 15" x 15"
- Pipe Size: 1-1/2" NPT
- Drain Size: 1" NPT
Operating Specifications For Heat Exchanger*
- Thermal Output: 45,000 BTUs
- Coil Hot/Cold Water Flow: 3 GPM
- Coil Pressure Drop: 12.7 ft. of head
- Water Flow: 22 GPM
*Thermal output is based upon a temperature difference of 80˚F between incoming hot and incoming cold water at the given flow rate.
