Product Description
Product Description
0.45 Micron Harmsco Hurricane 90 Premium All-Poly Filter Cartridge - HC-PP-90-0.45
These high flow polypropylene cartridges are designed for most applications where absolute rated pleated filtration is needed. These cartridges are constructed with 100% polypropylene materials. Efficiency ratings to 99.98% (Beta 5000). Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.
Features
Features- Fewer cartridges for fewer change outs and lower maintenance cost
- Pleated polypropylene filter media provides higher flow rates and lower initial pressure drop
- Pleated surface area provides higher loading capacity for longer filter life and increased particle removal
- Double o-ring end cap, center tube and media are thermally bonded as one integral component for added strength
- Offered in three sizes (40, 90, 170) and seven micron ratings (0.2, 0.45, 1, 5, 10, 20, 50) to meet high flow requirements
Applications
- Acids and bases
- Glycol
- Pre-filtration for DI resins
- Pre-filtration for UF membranes
- Photochemical plating solutions
- Organic solvents
- Machine coolants
- Food & Beverage
- Bottled water
- Aqueous solutions
- Magnetic tape coatings
- Pre-filtration for RO
- Cosmetics
- Inks
Specifications
- Micron rating : 0.45 Absolute
- Filter Media : Polypropylene
- Support Media: Polypropylene
- Outer Support Media: Polypropylene
- End Caps: Polypropylene
- Center Core: Polypropylene
- O-Rings: Silicone (standard), Buna, Viton
- Temperature : 180°F (82°C) max
- Sanitization/Sterilization:
- Filtered Hot Water - 194°F (90°C)
- Chemical Sanitization - industry standard concentrations of hydrogen peroxide, peracetic acid, sodium hypochlorite and other selected chemicals
- Netting : Polypropylene netting standard for 2-3/4" O.D.; 10" and 20" cartridges use polyethylene netting
- Change Out: 35 PSI Δ P (2.4 bar)
Sizing Guide
- Media (sq ft) : 50
- Recommended Flow Rate* (GPM) : 35
- Length : 19-1/2"
- O.D. : 7-3/4"
- No./Case : 1
*Harmsco™ recommends operation at 70% of maximum flow rate for optimum performance.
