Gro-Pro RO Commercial Reverse Osmosis Turnkey System

Test Parameters: *550 TDS Filtered (5 Micron), De-Chlorinated, Municipal Feed Water, 65 psi (4.50 bar) Feed Pressure, 100 psi (6.89 bar) Operating Pressure, 77 Degrees F (25 Degrees C), Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation. Scale prevention measures must be taken to prolong membrane life.

Low temperatures and high feed water TDS levels will significantly affect system’s production capabilities. Computer projections should be run for individual applications which do not meet or exceed minimum and maximum operating limits.

NOTE: US Water rates their Reverse Osmosis Systems under industry standards which are tested at 77 degree F, 500 TDS and 60 psi pressure. Production can vary dramatically depending upon water pressure, temperature and TDS (total dissolved solids) levels.

Additionally, for a reverse osmosis system to work effectively and economically, the following must be substantially removed from the water: hardness (to below 1gpg) - which means that a water softeners or anti-scalant must be used, chlorine, iron, sulfur and manganese. If these contaminants are removed and the entire system is purchased from US Water, there will be a 2-year system warranty. Warranty is void if these conditions are not met.