Green Wave Edge Salt-Free Water Conditioner

Sku: 387-GWE-3

Ask a question (1)
Regular Price: $2,500.00
Sale Price: $1,499.95
Out of stock

Outstanding Scale Prevention
Filters to 5 Microns
Removes Chlorine, Chloramine, & Chemicals
Removes Pesticides
Removes Tastes and Odors

You may also need

view less
Product Description

Green Wave Edge

Whole House Sediment, Chlorine, Chloramine, And Scale Prevention System

Not only does it prevent limescale and save you money on soaps and cleaning supplies while pampering your skin, but it also removes particulates, sediment, chlorine, chloramines, chemicals, tastes and odors.

If you are looking for a whole house Salt-Free water conditioning system that prevents scale and reduces chlorine and chemicals in the process, then this is it!

Green Wave Edge System Steps

Green Wave Benefits

  • Completely safe for drinking water
  • Easy to fit and low maintenance
  • No electricity needed - No waste water
  • Long life Green Wave cartridges of approximately 20,000 gallons - typically two months for the average family
  • 5 Micron Pre-Filter and Carbon Filter generally need replaced once a year.
  • Extends the life of appliances: dishwasher, washing machine, water heater, faucets, etc.
  • Glasses, silverware and cutlery stay like new
  • Cleaner bathrooms, showers and kitchens
  • Saves up to 40% on energy by reducing cost of energy bills
  • Save up to 30% of your normal soap and cleaning products
  • Softer and healthier skin - Reduces skin irritations and infections
  • Reduces particulate and sediment
  • Removes chloramines, chlorine, chemicals tastes and odors
  • Hot water filter traps scale formed in water heaters
  • Low purchasing and maintenance costs, pays for itself within one year
  • One-Year Money Back Guarantee on the Green Wave cartridge.

How It Works

The Green Wave Edge system starts with two high-flow filters - the first is s 5-micron pleated sediment filter which filters solids, particulate and sediment down to 5 microns, followed by a radial flow carbon filter which reduces chlorine, chemicals, tastes and odors. It then uses a unique and patented dosing system which adds a small amount silicopolyphosphate (a food grade material) to the water, effectively "sealing" Calcium and Magnesium from sticking to any surface or pipes. Silcopolyphosphate is a "food grade" product and is safe for human consumption according to the WHO and FAO recommendations. It meets all FDA requirements for being "food grade." Cities have used it for years on a smaller scale - it is completely safe - however if you don't want it in your drinking water... and you also want to remove 35,000 other contaminants that can be in your water, like chemicals, rocket fuel, pharmaceuticals, TCE, THM's and many others, then we suggest using Reverse Osmosis for drinking, cooking and the like.

The Truth About Lime Scale

Limescale is formed when cold water is heated in a water heater, boiler or tea kettle. In the process of heating water, such as in a water heater, calcium carbonate precipitates and forms limescale. Many people choose to install the Green Wave Solo on just the line to the water heater as the limescale does not form inside cold water pipes. About half the water used in a home is hot water, so the Green Wave Solo cartridge lasts about twice as long as when it is on both the hot and cold supply. Of course, it is completely acceptable to install it on the entire home water supply.



The Catalytic Carbon in the tank typically last 5 to 7 years.

The Green Wave Scale Prevention Cartridge is a slow-dissolving, slow-release canister that is rated to last 20,000 gallons. This can vary, based upon your water hardness and usage. In some cases, it can last 3 to 4 months and in others it might only last six (6) weeks. You can visibly see the level of media left in the cartridge so that when it is empty, you simply do the following to change the cartridge:

  1. Turn off the inlet water;
  2. Relieve the pressure by opening a faucet;
  3. Slowly remove the yellow chamber with the small wrench;
  4. Remove the cartridge and insert the new one;
  5. Put a thin layer of silicone on the rubber seal area;
  6. Put the seal back on the yellow chamber and screw back on.
  7. Hand tighten

The pre-filter typically need to be replaced once a year. To change them, you do the following:

  1. Turn off the inlet water;
  2. Relieve the pressure by opening a faucet;
  3. Use the filter wrench to loosen the first housing and then the second;
  4. Remove the cartridges and insert the new ones;
  5. Put a thin layer of silicone on the o-ring;
  6. Hand tighten and then secure with wrench

Water Quality Parameters

  • Application: Municipal water, but can be used on surface or well water with proper pre-treatment
  • Flow Rate: Designed to flow up to 15 GPM
  • Thread Size: 3/4" FNPT
  • Maximum Hardness: 80 GPG
  • Maximum Iron: Zero
  • Maximum Sulfur: Zero
  • Maximum Manganese: Zero
  • Maximum Oil: Zero
  • Maximum Copper: 1.3 mg/l
  • pH: 6 to 9
  • Feed Water Pressure: 20 to 100 psi
  • Feed Water Temperature: 38° to 100° F

view less
Additional Information

Availability Out Of Stock
Manufacturer US Water Systems
Pre-Filter Yes - 4.5" x 20" 5 Micron Pleated Filter
Carbon Filter Yes - 13" x 54" Catalytic Carbon Tank
Warranty Carbon Tank and Head - Lifetime
Filter Housings - 5 Years
Carbon Media - 3 Years

view less

view less

view less
Ratings & Reviews

view less
Product FAQs


Ask a Question