Posted in: Iron Removal, Salt-Free Systems, Water Softening, Water Filters, General
At US Water Systems, we have been working on the next generation of water softeners and water filters for quite some time and the future is now here. Beginning this month, we will release the future of water softening and filtration, NOW! Before I tell you about our new releases, let me first tell you what the parameters were on what we wanted accomplish:
We wanted a system that was as close to 100% American-Made as possible;
We wanted a control that was built to heavy-duty commercial specifications;
We wanted a control that did not use the old-fashioned "dinosaur buttons" which could be programmed in 15 seconds and monitored with a Smartphone; and
We wanted to make a system that was highly efficient.
- Matrixx Commercial Water Softener
- Matrixx pH Neutralizer
- Matrixx Sediment Superfilter
- Matrixx Greensand Superfilter
- Matrixx GAC Superfilter
- Matrixx Catalytic Carbon Superfilter
- inFusion Iron and Sulfur Eradication Filter
- Bodyguard Plus Superfilter
October 25, 2018605 view(s)
Did you like this post?
November 16, 2018 at 1:49 AM
I’m intrested in buying one of your water softeners. I like what I have read about your warrany. I have very hard water around 90 m. And I have 4 kids in the house. I want a good system that will give no problems like your article says. I need to know where to go to buy one or possible have it installed. Ricky
November 17, 2018 at 10:18 AM
The best way is to call one of our water specialist and they can point you the right direction. 800-608-8792
December 3, 2018 at 1:44 PM
I NEED PRICES FOR THIS SYSTEM "The Future of Water Softening and Filtration"
December 3, 2018 at 3:53 PM
Here you go: https://www.uswatersystems.com/matrixx-water-softener-with-smartphone-programming.html
December 12, 2018 at 12:25 AM
1. Is the Matrixx system still an "upflow" like the fusion NLT? 2. Can it be programmed on the panel without use of smartphone and app? 3. Our water is hard(25 gpg) well water, there are 3 adults in the home, 2 bathrooms...which size softener would be the most effective/efficient in terms of salt usage and number of regenerations per week?
December 14, 2018 at 2:00 PM
1. No, it is not. We have found that unless you have a mechanical method of holding the resin in place during bringing (it tends to "float" in brine), it really offers no advanatges. 2. Yes, but why? You can set it in an instant and program every cycle as well as see water usages on the App. It gives you total control of your system. 3. I would recommend the 15 GPM (53,000 grains).
December 28, 2018 at 3:52 PM
Matrixx is not upflow brining? I thought the advantage of upflow was reduced salt usage? I quote your site: Next Level Technology Upflow Brining – The most effective way to regenerate a water softener is upflow (or counter-current) brining which regenerates only the precise amount of resin needed to bring it back to a full charge. No other technology uses as little salt as counter-current brining, so you save big dollars on salt. Additionally, upflow brining provides softer water and allows dramatically less waste water. This is green technology which dramatically eliminates salt and water waste.
December 29, 2018 at 9:33 AM
In theory, that is correct. However, in the real world, with our Matrixx Precision Settings, we are able to do just as well as upflow brining. We believe that is because the bed needs to be "tightly packed" for upflow brining to be more efficient. With the freeboard allowed for backwash, we cannot increase the efficiency over downflow brining. Some companies use a "packed bed" and there are advantages and disadvantages to it. We have considered it, but feel the downside is too significant. We are more concerned with daily performance than jsut being able to point to a number which might not be attainable in the real world. We have also switched to the Vortech tank which allows for better flow rates and decreases water usage by up to 40%. This blog is a living breathing thing and change is inevitable.
January 12, 2019 at 2:07 AM
What Brand of Valve are you using? very interesting tech, have you attempted to work direct with any of the Manufacturers?
January 17, 2019 at 6:43 PM
Chris, that is proprietary information. All I can say is that it is made in the USA.
February 17, 2019 at 1:02 AM
Only interested in salt free that removes viruses and bacteria. From my well water. What do I need to buy and how much is the cost. I live in Florida.
March 6, 2019 at 8:36 PM
We have several system that do that. I would need to have more info about your water. Do you have a laboratory analysis?