view less−Product Description
US Water Systems Energy Mizer 2.5" x 21" 400 GPD Ultra Low Energy Membrane Element
Here's the best opportunity to cut costs and improve efficiency with US Water's Energy Mizer Technology. Ultra Low Energy - 80 PSI Reverse Osmosis Membranes - The BEST Ultra Low Energy Membrane on the Market! With an Energy Mizer membrane, your system operates at 80 psi, saving up to 40% on energy costs over systems that operate at 200-250 psi. Plus, low pressure membranes dramatically extend the life of your system because they operates at much lower pressures, putting less stress on pumps, motors, fittings, tubing and controls. It’s just like high blood pressure when you operate your system at 80 psi!
Manufactured using the industry’s leading patented membrane film technology. Energy Mizer Membrane Elements offer reliability and high performance, while delivering consistent results with high rejection rates, which equipment suppliers, distributors, and dealers worldwide have come to rely on. This is one of one of the industry’s highest flowing membranes. They are the only element on the market that operates at a pressure of 80 psi - meaning more energy savings. Energy Mizer Membrane Elements are also the best choice to counter the negative effects of cold water temperatures on reverse osmosis production.
- Ultra Low Energy Consumption
- High Rejection Rates
- Improved System Performance
- Superior Quality and Cost Savings
- Protective ABS Hard Shell
- Individually Tested
- Made in the U.S.A
- Membrane Type: Thin Film Composite
- Maximum Operating Temperature: 110°F (43°C)
- Minimum Concentrate Flow Rate: 5:1
- pH Range, Continuous Operation: 3 - 11
- pH Range, Short Term Cleaning (30 Min.): 1 - 12
- Maximum Feed Water Turbidity: 1 NTU
- Maximum Feed Silt Density Index (SDI): 5 SDI
- Chlorine Tolerance: 0 PPM
Permeate flow and salt rejection based on the following test conditions: 550 ppm Softened Tap Water, 77°F (25°C), 15% Permeate Recovery, 6.5 – 7.0 pH Range, and the specified applied pressure. Data taken after 30 minutes of operation. Maximum pressure drop for each element is 10 psi. Minimum salt rejection is 96%. Permeate flow for individual elements may vary +/- 20%.
Direct Replacement for the Following Membranes
- RoUltraTec 200394/HF5-2521
- Axeon HF5-2521
- Axeon HF4-2521
- Axeon HF1-2521
- Axeon HR3-2521
- Filmtec TW30-2521
- Filmtec XLE-2521
view less-Additional Information
|Membrane Size||2-/12" Commercial|
|Manufacturer||US Water Systems|
LiteratureSorry No Literature Available
view less-Ratings & Reviews
view less-Product FAQs
Want to know if this filter (US Water Energy Mizer 2.5" X 21" 400 GPD Membrane) will work in a Spectra Catalina watermaker. Mine uses 2 21" membranes.
Yes, those are the membranes.
I am currently using the HF1-2521, I am thinking about changing over to the HF5-2521. After reading the available information, I believe I can get as much if not more product and use less pressure. Could advise me as to any problems I may encounter. My main issue is excess sodium in my water.Thanks for you helpThat is the benefit of HF5 membranes. However, you may see a slight difference in water quality at the lower pressure. Depending on the feed water TDS the permeate TDS may be a higher reading than normal. Usually this reading doesn’t change much but there could be a change. These are especially good for applications that experience cold water temperatures in the winter.