1 Micron Flow-Max Filter Cartridges by Flowmatic (now Watts) are pleated for greater surface area, low pressure drop, extended life.

Flow-Max cartridges are pleated and therefore have dramatically more surface area. It only stands to reason that they filter longer and thus fewer replacement cartridges are needed.  The Flow-Max 1 micron cartridge is made of high-quality synthetic polyester. Synthetic filter media (cellulose free) is bacteria resistant and free of binders or additives which may cause foaming. 

Pleated cartridges have lower pressure drop, compared to "depth" cartridges. Therefore, smaller filter housings are required for the same flow rate, so filter housing costs are reduced.

Flow-Max Cartridges fit FLOWMATIC, HARMSCO, AMETEK & PENTEK Housings and exceed the specifications for any of these replacement filters.  If you are currently using Harmsco, Pentek or Ametek filters, the Flow-Max Cartridge beats the them hands down in durability, economy and dirt-carrying capacity.
 
Specifications:
Filter Media: 100% chemical resistant Polypropylene, Polyester and PET, with no binders or additives. A multi-ply laminate is used for longer life and greater solids removal.
End Caps: Plastisol (pliable PVC)
Dimensions: 4-1/2" OD x 9-3/4" length
Flow Rates (max): 8 GPM - 15 GPM per 9¾" Lengths, flow rates vary with micron rating
Micron Rating: 1 micron Nominal
Temperature: 40°F - 140°F (4.5°C - 60°C), vary based on pressure and load time
Recommended Change: 20 - 30 PSID

Recommended Usage:

• The Flow-Max 1 Micron Cartridge is for well water with moderate amounts of extremely fine sand, silt or sediment

8 Filters Per Case

Quantity Discounts
More Information on Flow-Max Filter Cartridges