Axeon HR3-4040 Series Membrane Elements 2,200 GPD Membrane ElementX
High Rejection - 225 PSI Commercial Reverse Osmosis Membranes
Manufactured using the industry’s leading patented membrane film technology. HR3 Membrane Elements offer reliability,high performance, and deliver consistent results with high rejection rates, which equipment suppliers, distributors, and dealers worldwide have come to rely on. HR3 Membrane Elements are one of the industries most reliable and highest performing reverse osmosis elements. Advanced membrane technology and manufacturing processes ensure high quality and performance, allowing for improved system performance.
- High Rejection Rates
- Improved System Performance
- Superior Quality and Cost Savings
- Individually Tested
- Made in the U.S.A
Membrane Type: Thin Film Composite
Maximum Operating Temperature: 110°F (43°C)
Minimum Concentrate Flow Rate: 5:1
pH Range, Continuous Operation: 3 - 11
pH Range, Short Term Cleaning (30 Min.): 1 - 12
Maximum Feed Water Turbidity: 1 NTU
Maximum Feed Silt Density Index (SDI): 5 SDI
Chlorine Tolerance: O PPM
High Rejection (HR) Membrane Material
Protective ABS Hard Shell
Made in the U.S.A.
Here's the best opportunity to cut costs and improve efficiency with Axeon's technology. The Axeon HR3 4040 Part Number is 200373 and is equivalent or better than Filmtec TW30-4040 or Desal AG4040TF
Permeate flow and salt rejection based on the following test conditions: 550 ppm Softened Tap Water, 77°F (25°C), 15% Permeate Recovery, 6.5 – 7.0 pH Range, and the specified applied pressure. Data taken after 30 minutes of operation. Maximum pressure drop for each element is 10 psi. Minimum salt rejection is 96%. Permeate flow for individual elements may vary +/- 20%.
Specs / Warrantty
|Availability||Typically In Stock|
|Membrane Size||4" Commercial|